Wichita Water & Sewer Connection Fees (2026)

Last reviewed: By Utility Cost Guide editor

The City of Wichita’s Public Works & Utilities department provides water and sewer at a typical address inside the city. For a new single-family home on the standard 1-inch service, the published city charges come to $4,795: a $1,812 water connection fee, a $1,520 water plant equity fee, a $1,350 sewer equity fee, a $60 sewer connection permit and a $53 account origination fee. The big local caveat is the lot’s history. If the parcel never paid into the benefit district that built the water or sewer lines in front of it, the city adds front-foot and square-foot fees that can more than double that total. For how this compares nationally, see our guide to the cost to connect to city water.

Official Wichita fees in one table

The table lists every Wichita row in our database with its source. All amounts come from the City of Wichita Code of Ordinances: the water new-service schedule in Section 17.12.080 (effective July 1, 2025), the sewer new-service schedule in Section 16.04.055 (effective January 1, 2025) and the permit fees in Section 16.04.040. Rows marked as not typical apply only to 2-inch services or to lots with a particular assessment history, and the city decides that by location.

ServiceCategoryFeeMeterAmountBasisEffectiveSourceVerified
Sewer — Capacity
SewerCapacitySewer Equity Fee (1-inch tap, service line and meter)1"$1,350by meter size2025-01-01Official source2026-09-24
SewerCapacitySewer Equity Fee (2-inch tap, service line and meter)2"$4,320by meter size2025-01-01Official source2026-09-24
Sewer — Main Extension
SewerMain ExtensionIn Lieu of Assessment Fee (sewer lines)—$56per linear foot2025-01-01Official source2026-09-24
SewerMain ExtensionMain Benefit Fee (sewer transmission mains)—$0.07per sq ft2025-01-01Official source2026-09-24
Sewer — Permit
SewerPermitSewer connection permit fee (connecting to the city sewer)—$60flat fee—Official source2026-09-24
Sewer — Tap
SewerTapSewer Tap and Saddle Fee (when required)—$344flat fee2025-01-01Official source2026-09-24
Water — Account Setup
WaterAccount SetupAccount Origination Fee—$53flat fee2025-01-01Official source2026-09-24
Water — Capacity
WaterCapacityWater Plant Equity Fee (1-inch tap, service line and meter setting)1"$1,520by meter size2025-07-01Official source2026-09-24
WaterCapacityWater Plant Equity Fee (2-inch tap, service line and meter setting)2"$4,860by meter size2025-07-01Official source2026-09-24
Water — Connection
WaterConnectionConnection Fee: 1-inch tap, service line and meter setting (complete installation by City staff or City contractor)1"$1,812by meter size2025-07-01Official source2026-09-24
WaterConnectionConnection Fee: 2-inch tap, service line and meter setting2"$5,068by meter size2025-07-01Official source2026-09-24
Water — Main Extension
WaterMain ExtensionIn Lieu of Assessment Fee (water lines)—$31per linear foot2025-07-01Official source2026-09-24
WaterMain ExtensionMain Benefit Fee (water transmission mains)—$0.03per sq ft2025-07-01Official source2026-09-24

Worked example for a single-family home in Wichita

Wichita’s new-service price list has no separate 5/8-inch or 3/4-inch line. The smallest line in the new water service schedule, Code Section 17.12.080, is a “1-inch tap, service line and meter setting,” installed by City staff or a City contractor for a $1,812 connection fee plus a $1,520 water plant equity fee. The sewer schedule in Section 16.04.055 ties the sewer equity fee to the same water meter: $1,350 for a 1-inch service. The drain layer pulls a $60 permit to connect to the city sewer under Section 16.04.040, and opening the utility account costs $53.

The lot-history fees work differently. Section 17.12.080 sets a water “in lieu of assessment” fee of $31 per front foot and a water main benefit fee of $0.032 per square foot of land; Section 16.04.055 sets the sewer versions at $56 per front foot and $0.071 per square foot. Front footage is capped at 100 feet for residential property. The cases below use a 70-foot-wide, 8,400-square-foot lot as an illustration; your lot’s dimensions and history will differ.

Published City of Wichita charges for one new single-family home on a 1-inch service (plumber’s and drain layer’s work not included).

Case Water connection + equity Sewer equity Permit + account Lot-history fees Total
Lot already assessed for its water and sewer lines $3,332.00 $1,350.00 $113.00 $0.00 $4,795.00
Same, sewer tap and saddle required $3,332.00 $1,350.00 $113.00 $344.00 $5,139.00
70 ft x 120 ft lot never assessed for water or sewer lines or mains $3,332.00 $1,350.00 $113.00 $6,955.20 $11,750.20

The third case adds the water in-lieu fee (70 x $31 = $2,170), the sewer in-lieu fee (70 x $56 = $3,920), the water main benefit fee (8,400 x $0.032 = $268.80) and the sewer main benefit fee (8,400 x $0.071 = $596.40), for $6,955.20. A lot might owe only some of these; the code says staff must know the specific location to decide which apply. The $344 sewer tap and saddle fee applies only “when required.” Under Section 16.04.110 the City’s sewer maintenance crew makes the tap and installs the saddle on clay tile sewer mains, and on PVC or ABS mains when the contractor chooses; a licensed contractor can tap a plastic main itself with its own saddle.

The code waives the in-lieu and main benefit fees when a private developer paid for the lines and the cost was built into the lot price. In a new subdivision that is common, so ask the city about your parcel before you budget the high case.

Costs outside the Wichita fee schedule

The City installs the tap, the department service line, the meter setting and the meter in the right-of-way. Section 17.12.040 makes everything from the meter to the house the owner’s job, done by a master plumber. On top of the city charges you will pay for:

National figures are estimates from our benchmark set. The calculator below loads Wichita’s official fees; add your contractors’ quotes:

Estimate utility connection costs

Estimates are planning figures, not quotes. Confirm fees and trench rules with your utility.

Location and property
Services and site work

Many codes require horizontal separation between water and sewer. This estimate assumes separate water and sewer trenches unless you select a shared run where your utility allows it.

Quoted fees and comparison assumptions

How and when Wichita fees are paid

Under Section 17.12.040(h), the water connection fee is paid in advance, before the City installs the standard service. The water plant equity fee (Section 17.12.061) and the sewer equity fee (Section 16.14.041) are both due before connection, and the code describes them as a buy-in to the equity existing customers have built up in the systems. The department decides the meter size and the service line size from the information you give it, so don’t assume a size before you apply.

The sewer side runs through the building inspection office. Section 16.04.020 requires a licensed master drain layer to get the permit, and it is issued only after the building’s plumbing has passed inspection. Work must start within 120 days and finish within a year, or the permit is canceled and the fees are forfeited.

Owners who can show economic hardship may apply to defer the water and sewer equity fees under the rules in Sections 2.24.070 and 2.24.075, and the code allows deferral outside the city limits as well.

Wichita fee changes to watch

How Wichita compares

Wichita costs more than its regional neighbors because it charges plant equity fees for both water and sewer. In Oklahoma City, a new two-bath home with a 5/8-inch or 3/4-inch meter pays $1,283.28 in published city charges. Tulsa charges $703.64 for a 5/8 x 3/4-inch meter, and we found no impact fee there. KC Water charges $858.00 for a 3/4-inch tap on an iron main. Wichita’s $4,795 is higher than all three, but the $1,812 connection fee covers the tap, service line and meter setting done by the City. In Tulsa a licensed contractor makes the tap and bills for it separately, and in Kansas City the digging and pipe are on the plumber’s bill.

Wichita tap fee FAQ

How much does Wichita charge to connect a new house to water and sewer?

On a 1-inch service, the published city charges are $4,795: $1,812 connection fee, $1,520 water plant equity fee, $1,350 sewer equity fee, $60 sewer permit and $53 account origination fee. Lots that never paid into a water or sewer benefit district can owe front-foot and square-foot fees on top.

What is a plant equity fee?

It is Wichita’s system buy-in charge, the local version of an impact or capacity fee. The code sets it from an analysis of the equity existing customers have in the plant. It is $1,520 for water and $1,350 for sewer on a 1-inch service, and both are due before connection.

What is the in lieu of assessment fee?

Wichita usually pays for water and sewer lines through benefit districts, and property owners repay the cost as special assessments. A parcel that never took part is charged instead: $31 per front foot for water and $56 for sewer, capped at 100 feet for a residence. With 100 feet of frontage, that is $3,100 plus $5,600.

Does the City install the water meter?

Yes. For a standard 1-inch or 2-inch service, City staff or a City contractor makes the tap and installs the service line, meter setting and meter, and that work is included in the connection fee. Your master plumber installs the line from the meter to the house.

Can the fees be deferred?

Owners who show economic hardship can apply to defer the water and sewer plant equity fees under the criteria in Code Sections 2.24.070 and 2.24.075. Applicants connecting a 1-inch service to a main the City extended into a groundwater contamination area may be allowed to pay the water equity fee in five yearly installments, secured by a note and mortgage.

Related: water tap fees · sewer tap fees · tap fee vs. impact fee · sewer connection cost · cost to bring utilities to land · utility connection cost calculator

Wichita fee sources